10Micron GM3000 HPS German Equatorial Mount

Product code: 1453000
German "go to" equatorial mount, professional grade, exclusive 10Micron HPS technology with absolute encoders and high performances motor drives; high payload capacity of 100 Kg (220 lbs).
You will earn 15545 points with this purchase
10Micron GM3000 HPS German Equatorial Mount
The 10Micron GM3000 HPS German equatorial mount is the third mount in their equatorial mount line-up. It shares the same high level of Italian engineering, craftmanship, build quality and features of all the other 10 Micron HPS mount range.

The GM3000 HPS mount is built for observatories with an instrumentation up to a weight of 100 kg – 220 lbs (excluding counterweights). It is ideal for remote observation sites, and its loading capacity allows for mounting instruments like 200 mm diameter refractors, 300 mm diameter Newton reflectors, 450 mm diameter Cassegrains and so on. Movements are driven by two  servo brushless motors, with timing belt reduction having zerobacklash. Both axes feature a classic worm – wormwheel pairing. The wormwheels are made of bronze (B14), with a diameter of 244 mm and 315 teeth in right ascension, and a diameter of 192 mm and 250 teeth in declination. The worms are made of alloy tempered steel with a diameter of 32 mm and 24 mm respectively. The axes themselves are made of alloy steel, with a diameter of 80 mm (right ascension) and 60 mm (declination), for the maximum rigidity.
The electronics is housed in an independent control box, easily removable. The connections of the mount and keypad secutiry lock screws. Only one cable runs from the control box to the mount. The axes feature an hole allowing for the passage of instrumentation cables. This effectively solves the problem of entangling cables and damaging instruments, especially for remote observatories. The mount is powered with low voltage, requiring a maximum power of about 100W. This makes possible using the mount even in locations with limited power available. The GM3000HPS can be controlled completely using the included keypad, without requiring any external PC.

The keypad is built in order to maintain the maximum readability in all lighting conditions. Both the display and the ergonomic keys, allowing for the use of gloves, feature a red backlight. An heater keeps the display warm for usage below freezing temperatures. The mount can be controlled using the most common software packages by connecting it to a PC with the RS-232 serial port or the Ethernet connection, via the 10micron ASCOM driver or the Meade compatible command protocol. Furthermore, a dedicated software (also included with the mount) can be used to create a “virtual keypad” replicating exactly the functions of the physical keypad. The RS-232 port can also be used to control an external dome. This flexibility makes the GM3000HPS an ideal mount for observatories and remotized observing sites. The object database contains many star catalogs and deep-sky objects up to the 16th magnitude. Solar system objects can be tracked so that their motion is compensated with respect to the stars. You may load orbital elements of comets, asteroids and artificial satellites into the mount, so that these objects can be tracked directly.

Pointing is made accurate through the usage of a model containing up to 100 stars, which allows for the correction of the classical polar alignment and conic errors, and also of the most important flexure terms of the optical tube. In this way it is possible to obtain pointing accuracies of the order of 15 arcseconds RMS. The same model can be used in order to obtain the maximum tracking accuracy, compensating also for the atmospheric refraction (depending on the local atmospheric pressure and temperature).
A series of auxiliary functions is provided to help the user for quick aligning the mount to the celestial pole. You may also save and recover the alignment data of different observing sessions. This function is very useful if you have many instruments in different setups, each one requiring different flexure corrections. Tracking through the meridian, a typical problem with german mounts, is solved allowing for tracking for up to 30° past the meridian (configurable), in both directions. In this way any object can be tracked for at least four hours.
The tracking accuracy makes autoguiding not necessary for many uses.


Type German Equatorial Mount
Weight (mount) 65 kg – 143 lbs without accessories
Instrument payload capacity 100 kg – 220 lbs
Latitude range 20° – 70°
Azimuth fine adjustment range +/− 10°
Counterweight shaft 50 mm diameter, stainless steel, weight 8 kg – 18 lbs
Axes R.A. 80 mm diameter, alloy steel
Dec. 50 mm diameter, alloy steel
Bearings Pre-loaded tapered roller bearings
Worm wheels R.A. 315 teeth, 244 mm diameter, B14 bronze
Dec. 250 teeth, 192 mm diameter, B14 bronze
Worms screw Diameter 32 mm (r.a.) and 24 mm (dec.), tempered alloy steel, grinded and lapped
Transmission system Backlash-free system with timing belt and automatic backlash recovery
Motors 2 axes servo brushless
Power supply 24 V DC
Power consumption ~ 1 A while tracking 
~ 3.5 A at maximum speed 
~ 5 A peak
Go-to-speed Adjustable from 2°/s to 12°/s (9°/s in r.a.)
Pointing accuracy < 20” with internal multiple-stars software mapping
Average tracking accuracy < +/− 1" typical for 15 minutes (< 0.7" RMS) with multiple-stars software mapping and compensation of flexure and polar alignment errors
Security stop +/− 30° past meridian in r.a. (software)
+/− 35° past meridian in r.a. (mechanical)
+/− 170° interval in dec. (software)
+/− 172,5° interval in dec. (mechanical)
Operational temperature range (standard) - 15° C to + 35° C
+ 05° F to + 95° F
Storage temperature range - 40° C to + 50° C
- 40° F to +122° F
Special operational temperature range Optional, for very low temperature operations (until -35°C); see options for more details
Communication ports RS–232 port; GPS port; autoguide ST-4 protocol port; Ethernet port
Database Stars: by name, Bayer designation, Flamsteed designation, Bright Star Catalogue, SAO, HIP, HD, PPM, ADS, GCVS. 
Deep-sky: M, NGC, IC, PGC ,UGC limited up to mV = 16. 
Solar system: Sun, Moon, planets, asteroids, comets, artificial satellites. 
Equatorial and altazimuth coordinates. 
User defined objects, fast slewing positions.
Firmware features User defined mount parking position, 2-stars and 3-stars alignment function, up to 100 alignment stars for modeling, correction of polar alignment and orthogonality errors, estimate of average pointing error, storage of multiple pointing models, sidereal, solar and lunar tracking speed adjustable on both axes, declination-based autoguide speed correction, adjustable horizon height limit, pointing and tracking past meridian, assisted balance adjustment, manual or GPS based time and coordinates setting, dome control via RS-232, configurable atmospheric refraction, network settings, comets and asteroids filter, multi-language interface. Remote Assist via Internet connection.
PC control Remote control via RS-232 or Ethernet; proprietary ASCOM driver or Meade compatible protocol; update of firmware and orbital elements of comets, asteroids and artificial satellites via RS-232 or Ethernet; virtual control panel via RS-232 or Ethernet. Wi-Fi included to control the mount via Tablet, Smartphone etc.

Package Contents

  • GM 3000 HPS Mount head with built-in precision absolute axis-encoders and WiFi option included
  • Control box with onboard-intelligence Linux-processor, stand alone system V. 2 HPS version firmware
  • 4-line key pad unit with graphic display and temperature control (#1452059)
  • Counterweight bar with counterweight end stop
  • Allen key set
  • Power and connection cables
  • USB stick with software and manual

Please note:

In order to purchase the GM3000, mandatory shipping kit is required. This kit  comprises of the pier adaptor (#1453090) and the shipping crate (#1453100). The pier adaptor can be used to mount the GM3000 onto a customer or Baader pier.

Counterweights, Dovetail clamp, pier adaptor and power supply are not supplied as standard with this package. 

​​​​​​​Typical leadtime is approximately 10-14 days contact us to check
Own this product? Let us know what you think.
Brand 10Micron
Condition New
Product Code 1453000