Celestron AstroMaster 114EQ Newtonian Telescope with Motor Drive and 1.25” Smart Phone Adapter
Discover our Solar System with the Celestron AstroMaster 114EQ! You’ll be ready to observe in minutes thanks to the quick and easy no-tool setup. The 114EQ provides bright, clear images of the Moon, planets, star clusters, and more for great nighttime viewing.
Manual German Equatorial telescope
The AstroMaster mount comes with two slow motion control knobs that allow you to make fine pointing adjustments to the telescope in both Right Ascension and Declination axes, also referred to as RA and DEC.
Accessories include a 20mm and 10mm eyepiece, a finderscope, a smartphone adapter, and a motor drive. The two eyepieces offer different magnifications for low and high powered views.
Motor Drive - Turn your manual German equatorial mount into a tracking mount by adding the included RA motor drive to your telescope. This easy-to-install RA motor drive compensates for the Earth’s rotation, so the telescope tracks a star’s movement through the night sky from east to west. When the telescope mount is properly polar aligned and the RA drive is attached and running, the user need only make occasional adjustments in declination (Dec) to keep an object in the eyepiece for long periods of time. The Celestron single-axis motor drive runs on a 9V battery, so there are no cords to get in the way. The drive can be used in either the Northern or Southern Hemisphere. To change hemispheres (reverse the motor’s direction), simply by flip the N/S switch on the face of the motor drive. It is also simple to change the speed of the motor. A “Speed Rate Regulator” knob is located just under the power indicator and can be turned in either direction to slow down or speed up the motor. Since solar system objects like the Moon and planets move through the sky at different rates than deep-sky objects do, this gives you the ability to match the motor’s speed to the particular type of object you are observing.
Image celestial or terrestrial objects with this smartphone adapter. With its light, rigid frame, this accessory allows you to connect any smartphone to any telescope eyepiece with an outside diameter of 34mm. The additional magnification provided by the eyepiece allows your phone to capture great images of the Moon and planets. This adapter installs easily by placing the smartphone over the telescope eyepiece and tightening the knobs to securely lock your phone in place. The adapter accommodates most phones with the case on, but some large and/or bulky phone cases (including folio style cases) may need to be removed for the phone to fit in the adapter.
OPTICAL TUBE INFO:
Optical Design Newtonian Reflector
Aperture 114mm (4.48")
Focal Length 1000mm (39.37")
Focal Ratio f/8.77
Focal Length of Eyepiece 1 20mm (0.79") with built-in erect image corrector
Magnification of Eyepiece 1 50x
Focal Length of Eyepiece 2 10mm (0.4") standard
Magnification of Eyepiece 2 100x
Finderscope Built-in StarPointer
Highest Useful Magnification 269x
Lowest Useful Magnification 16x
Limiting Stellar Magnitude 12.8
Resolution (Rayleigh) 1.22 arc seconds
Resolution (Dawes) 1.02 arc seconds
Light Gathering Power (Compared to human eye) 265x
Optical Coatings Aluminum
Optical Tube Length 508mm (20")
Mount Type Manual German equatorial
Tripod 1.25" steel tube legs
Software Starry Night Basic Edition
PHONE ADAPTER INFO:
Phone Compatibility Any smartphone
Comptabile Optics Any 1.25" eyepiece supplied with PowerSeeker and AstroMaster telescope kits or any eyepieces with a 34 mm outside diameter
Dimensions 6.5" x 4.5" x 1"
Weight 2 oz
Included Items Newtonian Reflector | 20mm & 4mm eyepieces | 3x Barlow Lens | Finderscope | Motor drive | smartphone adapter | Tripod & mount | manual